Multi-Mounts and Trolling Motor Mounts

Angler's Pal Multi-Mounts offer the strength and flexibility to mount your sonar/GPS and chart plotting equipment anywhere in the boat for easy reading. Specifically designed to eliminate drift with unmatched stability to firmly support the heaviest electronic equipment. This unmatched holding power is achieved with the patented universal ball locking device making them virtually vibration free. 

Angler's Pal gives you a 360 degree full hemisphere of possible positions whether mounting on the deck, gunnel, console or on a rail. (Angler's Pal Universal rail mount kit available) 

Made of corrosion resistant stainless steel and hard anodized aluminum for fresh and saltwater use. Easily removed for security or storage when used with the NEW Quick Release introduced in 2015.

TrollMaster MountTROLLMaster Mount

SKU: AP-TM

Designed to mount any TROLLMaster remote control for convenient viewing at almost any angle. TROLLMaster Remote Control sold separately.


TrollMaster Mount Plate OnlyTROLLMaster Mount Plate Only

SKU: AP-12006

Convert any Angler's Pal Electronics mount into a TROLLMaster hand held Remote Mount. Your existing Angler's Pal mount will now allow you to read and operate your TROLLMaster remote from almost anywhere in the boat. Can be easily removed for security and storage. Nylon,(4" x 2-1/2") For the most convenience, use the Angler's Pal Quick Disconnect (AP-500) sold separately. 


Quick Release

SKU: AP-500

Quick ReleaseThe Angler's Pal quick disconnect allows the user to quickly and effortlessly remove expensive electronics from the boat for safe storage. With just a push of the plunger pin and a quick twist, the unit is protected. Only for use with Angler's Pal electronics mounts. Constructed of corrosion-resistant, fiberglass-reinforced polypropylene and stainless steel, the quick disconnect is lightweight and suitable for fresh or saltwater environments.

  • 3-3/4" diameter; 15/16" height
  • Stainless steel mounting hardware included
  • Not recommended for use with electronics weighing over 5 lbs.


4" Quick-Release Mount

SKU: AP-509

4 Quick-Release MountThe AP-509 couples the AP-MT4NYL 4" nylon composite mount with the NEW AP-500 Quick Release. Now you can quickly and effortlessly remove expensive electronics from the boat for safe storage. With just a push of the stainless steel plunger pin and a quick twist, your unit protected. Constructed of corrosion resistant, lightweight and durable materials that will stand up to fresh or saltwater environments.

  • Stainless steel mounting hardware included
  • For use with Angler's Pal electronics mounts only
  • Not recommended for use with electronics weighing over 5 lbs.
 

Lowrance Elite and Mark Series Quick-Connect

SKU: AP-505

Lowrance Elite and Mark Series Quick-ConnectDesigned to work with Angler's Pal mounts, this adapter allows the user to quickly connect a Lowrance Elite or Mark Series Sounder/GPS to an Angler's Pal mount. Just replace the universal mount plate that was provided with the original AP mount with the new AP-505 adapter and attach the unit. When ready for storage, just press and lift to remove your electronics from the mount. Fits Lowrance and Mark series units.


AP-507 Lowrance MountLowrance Elite and Mark Series Mount

SKU: AP-507

The AP-507 utilizes the versatility of the Angler's Pal nylon compositie electronics mount (AP-MT4NYL) coupled with the AP-505 Lowrance quick mount adapter which provides the user with an easy, quick connection for Lowrance Elite and Mark Series electronics. Just snap into place for viewing at almost any angle. With just a press of the release button, the unit can be removed and stored for security.





AP-MT4 Multi MountAP-MT4 Multi Mount

SKU: AP-MT4

The AP-MT4 is our lowest profile model at only 4” off the mount surface. This allows you to mount your electronics in the tightest spots!

AP-MT4NYL Nylon Composite Electonics Mount

SKU: AP-MT4NYL

AP-MT4NYL  Nylon Composite Electonics MountThe AP-MT4NYL is constructed of nylon reinforced composite making it our lightest and most affordable electronics mount yet. It features the the unmatched strength and durability that Anglers Pal mounts are known for at a very affordable price! MT4 models are our lowest profile units which allows you to mount your electronics in the tightest spots! Comes complete with stainless steel mounting hardware.

Multi Mount Spec Sheet


AP-MT8 Multi Mount

SKU: AP-MT8

  • AP-MT8 Multi MountMachined Aluminum and Stainless Steel
  • Overall length: 8 in

Multi Mount Spec Sheet


AP-MT10 Multi Mount

AP-MT10 Multi MountSKU: AP-MT10

  • Machined Aluminum and Stainless Steel
  • Overall length: 10 in

Multi Mount Spec Sheet


AP-MT14 Multi MountAP-MT14 Multi Mount

SKU: AP-MT14

  • Machined Aluminum and Stainless Steel
  • Overall length: 14-5/8 in

Multi Mount Spec Sheet


AP-MT17 Multi MountAP-MT17 Multi Mount

SKU: AP-MT17

  • Machined Aluminum and Stainless Steel
  • Overall length: 17 in

Multi Mount Spec Sheet



Universial Mount PlateUniversial Mount Plate

SKU: AP-12001

  • Anodized aluminum (6-7/16" x 2-1/2")




Universial Mount Plate, NylonUniversial Mount Plate, Nylon

SKU: AP-12001NYL

  • Nylon (6-7/16" x 2-1/2")
 
 



HummingbirdLorwance Mounting PlateHummingbird/Lowrance Mounting Plate

SKU: AP-12003

  • Anodized Aluminum (4-1/2" x 4 1/2")


HummingbirdLowrance Mounting Plate, NylonHummingbird/Lowrance Mounting Plate, Nylon

SKU: AP-12003NYL

  • Nylon (4-1/2" x 4-1/2")


Angler's Pal Trolling Motor Mount

  • With Angler's Pal Trolling Motor Mounts, you can easily secure your bow-mount trolling motor to prevent damage in transport or when boating at high speeds.
  • Angler's Pal Trolling Motor Mounts can be mounted anywhere in the boat and quickly positioned for securing the trolling motor. They give you a 360 degree full hemisphere of possible positions.
  • Angler's Pal Multi-Mounts feature a universal ball locking device with a "select position" locking knob.
  • Trolling Motor Mounts are made out of rust-resistant stainless steel for fresh and saltwater fishing.
  • An "Allen Wrench" easily removes your Trolling Motor Mount for security, transport, or storage.

Trolling Motor Spec Sheet